Reference Guide

RAC0128
Message An error has occurred in vFlash.
Detailed Description A non-specific error has been detected while accessing the vFlash.
Recommended Response Action Try the operation again in a few minutes. If the problem persists, reset iDRAC before
trying the operation again.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0129
Message An error has occurred while initializing the SD card.
Detailed Description No status response was returned after completing the initialization request.
Recommended Response Action Try reinitalizing the card again in a few minutes.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC013
Message Invalid FQDD
Detailed Description The FQDD provided is not valid for the current method
Recommended Response Action Provide valid FQDD
Category Configuration
SubCategory RAC = RAC Event
584