Reference Guide

Recommended Response Action Provide valid attribute
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0140
Message Firmware update has failed.
Detailed Description The firmware update process returned an Update Failed status.
Recommended Response Action Try the firmware update again in a few minutes. If the problem persists, try
uploading the firmware through another interface such as Web GUI, RACADM, or
DUPs.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0141
Message Firmware update verification failed: The update status is unknown.
Detailed Description Firmware update verification process failed; the firmware update status is unknown.
Recommended Response
Action
Verify if the firmware has been updated by checking the new firmware version number.
If it has not been updated try the firmware update again in a few minutes. If the
problem persists, try uploading the firmware through another interface such as Web
GUI, RACADM, or DUPs.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
589