Reference Guide

Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE TRUE TRUE TRUE TRUE FALSE TRUE TRUE TRUE
AMP0302
Message The system board
arg1 current is greater than the upper warning threshold.
Arguments
–
arg1 =
name
Detailed Description Product documentation contains information on correct configuration. The failure
could also be caused by a faulty component or related cabling. System performance
may be degraded.
Recommended Response Action Review system power policy, check system logs for power related failures, and
review system configuration changes.
Category System Health
SubCategory AMP = Amperage
Severity Severity 2 (Warning)
Trap/EventID 2178
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE TRUE TRUE TRUE TRUE FALSE TRUE TRUE TRUE
AMP0303
Message The system board
arg1 current is greater than the upper critical threshold.
Arguments
–
arg1 =
name
Detailed Description Product documentation contains information on correct configuration. The failure
could also be caused by a faulty component or related cabling. System performance
may be degraded.
Recommended Response Action Review system power policy, check system logs for power related failures, and
review system configuration changes.
Category System Health
SubCategory AMP = Amperage
Severity Severity 1 (Critical)
Trap/EventID 2177
60