Reference Guide

RAC0218
Message The maximum number of user sessions is reached.
Detailed Description A maximum of 4 iDRAC Web GUI sessions can be open at any time.
Recommended Response Action Close one or more sessions before opening another session.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0219
Message Power command failed.
Detailed Description Requested power state change has failed.
Recommended Response Action Try the operation after a few minutes. If the problem persists, reset iDRAC and
repeat the operation.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC022
Message The User Name is not configured so cannot Enable the User or set values for User
Password IPMILan IPMISerial or User Admin Privilege
Detailed Description The User Name is not set
Recommended Response Action Set User Name before attempting to enable settings
Category Configuration
605