Reference Guide

Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0226
Message Send Failed: Request processing failed.
Detailed Description Sending the test mail failed. This will prevent alert messages from being sent to this
email address.
Recommended Response Action Confirm that: 1. A valid SMTP server address is configred in the iDRAC. 2. The
remote email server is configured properly to send and receive emails.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0227
Message SD card is not detected: Insert an SD Card of size greater than 256MB.
Detailed Description The SD card is not present, or communication with the SD card is lost. This could result
in reduced functionality and capabilities.
Recommended Response
Action
This error may occur because: 1. Make sure the SD card is seated correctly. 2. The SD
card is invalid. Insert a valid SD card of size greater than 256MB and try again.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
608