Reference Guide

Detailed Description The vFlash partition is in-use by another process. Therefore, the current operation
cannot proceed.
Recommended Response Action Try the operation after a few minutes. If the problem persists, reset iDRAC and
repeat the operation.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC025
Message DNS from DHCP is Enabled so cannot set values for DNS1 or DNS2
Detailed Description Cannot set static values when DHCP is enabled
Recommended Response Action Disable DHCP to set values for DNS1 or DNS2
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0250
Message One or more partitions are read-only.
Detailed Description The vFlash partitions are read-only. Therefore, the current operation cannot
proceed.
Recommended Response Action Make sure the partitions are writable before attempting to change their contents.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
617