Reference Guide

Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0294
Message The Character Accumulate Interval value is invalid. Expected range: 1-255.
Detailed Description The amount of time iDRAC waits before sending a partial Serial Over LAN (SOL) data
packet. This parameter is specified in milliseconds. It is recommended to use 10
milliseconds for optimal performance.
Recommended Response
Action
Enter a valid Character Accumulate Interval value. Expected range: 1-255.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0295
Message The Character Send Threshold value is invalid. Expected range: 1-255.
Detailed Description This is the number of characters per Serial Over LAN (SOL) data packet. When the number
of characters accepted by iDRAC is equal to or greater than the Character Send Threshold
value, iDRAC starts transmitting SOL data packets that contain the numbers of characters
equal to or less than the Character Send Threshold value. If a packet contains fewer
characters than this value, it is defined to be a partial SOL data packet. It is recommended
to use 255 characters for optimal performance.
Recommended Response
Action
Enter a valid Character Send Threshold value. Expected range: 1-255.
Category Audit
SubCategory RAC = RAC Event
636