Reference Guide

Detailed Description The operation failed to run due to an unknown error in iDRAC.
Recommended Response Action Retry the action. If this fails, reset iDRAC.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC039
Message Invalid parameter value for
arg1 .
Arguments
–
arg1 =
parameter
Detailed Description The value provided for the specified parameter is invalid.
Recommended Response Action Verify the value for the specified parameter. Refer to the Lifecycle Controller-
Remote Services documentation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC040
Message Missing parameters
arg1 .
Arguments
–
arg1 =
parameters
Detailed Description One or more required parameters needed for the method invoked in the operation
are missing.
Recommended Response Action Verify that all required parameters are provided. Refer to the Lifecycle Controller-
Remote Services documentation.
Category Configuration
643