Reference Guide

Recommended Response Action Reset iDRAC and retry the operation.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0500
Message There are no batteries to be displayed.
Detailed Description Batteries cannot be displayed. This error may occur if the host system is powered off
or there is a bad or disconnected cable for batteries connected to the controller.
Recommended Response
Action
1. Check if the host system is powered off or shutdown. 2. Verify that the batteries are
connected properly.
Category Storage
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0501
Message There are no physical disks to be displayed.
Detailed Description Physical disks cannot be displayed. This error may occur if the host system is powered
off or the physical disks are removed. This may result in communication loss while
retrieving controller data.
Recommended Response
Action
1. Check if the host system is powered off or shutdown. 2. Check if the physical disks are
inserted into the enclosure or attached to the backplane. 3. There are no out-of-band
capable controllers detected.
Category Storage
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
648