Reference Guide

RAC0504
Message There are no enclosures to be displayed.
Detailed Description Enclosures cannot be displayed. This error may occur if the host system is powered off,
there is no enclosure connected to the controller, or there is a bad or disconnected
adapter cable for the enclosure.
Recommended Response
Action
1. Check if the host system is ON. 2. Check if the Storage Enclosure is ON. 3. Verify that
the adapter cables are properly connected and there are no bent pins.
Category Storage
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0505
Message There are no devices to be displayed.
Detailed Description Devices are not displayed. This error may occur because these components are
removed or disconnected.
Recommended Response
Action
1. Check if the host system is ON. 2. Check if the Storage Enclosure is ON. 3. Verify
that the adapter cables are properly connected and there are no bent pins.
Category Storage
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0506
Message You do not have privileges to perform this operation.
650