Reference Guide

RAC0910
Message Invalid subcommand syntax: Specify group and object name.
Detailed Description The specified command is missing group and object name syntax.
Recommended Response Action Specify the correct subcommand group and object name syntax. See the help text or
documentation for the valid syntax.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0911
Message Data about version details is unavailable.
Detailed Description Unable to retrieve version details.
Recommended Response Action Try again later. If the problem persists, contact technical support. Refer to your
product documentation to choose the contact method that is convenient for you.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0912
Message Unable to connect to RAC at specified IP address.
Detailed Description The management system could not connect to the iDRAC.
Recommended Response Action Verfiy whether the IP address of the remote iDRAC is correct. Verify whether
connectivity exists between the management system and the iDRAC.
667