Reference Guide

Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC913
Message Unable to login to RAC using the specified address
Detailed Description The management system could not login to the iDRAC.
Recommended Response Action Verify whether the username and password given for the iDRAC are correct.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC914
Message Value specified is invalid: Must be 0 (Off) or 1 (On).
Detailed Description The specified value is not within the valid range. To set the LED state to off, enter 0.
To set the LED state to on, enter 1.
Recommended Response Action Set the numeric value to 0 (Off) or 1 (On).
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
668