Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC915
Message 1000Mbps speed setting is Read Only and cannot be configured for the iDRAC NIC.
Detailed Description Only possible configurations for the DRAC NIC are 10Mbps and 100 Mbps. For
documentation with respect to this setting, refer to the racadm User Guide under
cfgNetTuning group.
Recommended Response Action No response action is required.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC916
Message Value given exceeds the maximum threshold value.
Detailed Description The value given is greater than the maximum threshold value.
Recommended Response Action Set values lesser than the maximum threshold value. To view the maximum
threshold value, run racadm get System.Power. Cap.MaxThreshold at the command
prompt.
Category Configuration
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
669