Reference Guide

45
SEL Event Messages
SEL0002
Message Logging is disabled.
Detailed Description This message appears when event logging of a specific type is disabled by the user.
(IPMI sensor type code 10h - offset 01h)
Recommended Response Action If unintended, re-enable logging.
Category System Health
SubCategory SEL = Sys Event Log
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SEL0003
Message Logging is enabled.
Detailed Description None
Recommended Response Action No response action is required.
Category System Health
SubCategory SEL = Sys Event Log
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
725