Reference Guide

Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
SEL0012
Message Could not create or initialize the system event log.
Detailed Description if the system event log failed to initialize platform status and failure events are not
captured. Some management software will not report platform exceptions.
Recommended Response Action Reboot the management controller or iDRAC. Cycle system input power. If problem
persists call support.
Category System Health
SubCategory SEL = Sys Event Log
Severity Severity 1 (Critical)
Trap/EventID 2377
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
SEL0013
Message The system event log was created or initialized successfully.
Detailed Description None
Recommended Response Action No response action is required.
Category System Health
SubCategory SEL = Sys Event Log
Severity Severity 3 (Informational)
Trap/EventID 2379
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
728