Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software 7.0

751

752

753

754

755

756

757

758

759

760

STOR030

Message Controller not found

Detailed Description The provided controller could not be found

Recommended Response Action Provide a valid controller FQDD.

Category Configuration

SubCategory STOR = Storage

Severity Severity 2 (Warning)

LCD Message No LCD message display defined.

Initial Default. None

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE

STOR031

Message Lifecycle Controller is not enabled.

Detailed Description For 11G systems: System Services must be enabled to perform the requested operation.

System Services has been disabled through the iDRAC configuration utility accessed by

pressing CTRL+E on boot up or through a remote operation. For 12G systems: Lifecycle

Controller must be enabled to perform the requested operation. Lifecycle Controller has been

disabled by pressing F2 Setup, selecting iDRAC Configuration, and selecting Lifecycle

Controller Settings on boot up or through a remote operation.

Recommended

Response Action

For 11G systems: Use the iDRAC configuration utility to enable the System Services by

pressing on the CTRL+E option on boot up at the targeted system. For 12G systems: Use F2

Setup, select iDRAC Configuration, and select Lifecycle Controller Settings, to enable the

Lifecycle Controller on boot up of the targeted system.