Reference Guide

STOR0502
Message Failed to Launch RAID Configuration Wizard.
Detailed Description USC- LCE failed while creating RAID configuration.
Recommended Response Action Make sure the RAID controller is installed. Then, do the following: 1) Reboot the
system. 2) Press the F10 key to re-enter Lifecycle Controller. 3) Retry RAID
configuration.
Category Storage
SubCategory STOR = Storage
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
STOR0503
Message Existing RAID Configuration erased successfully.
Detailed Description Existing RAID Configuration erased successfully.
Recommended Response Action No response action is required.
Category Storage
SubCategory STOR = Storage
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
STOR0504
Message The RAID operation was successful.
Detailed Description The RAID operation completed successfully.
Recommended Response Action No response action is required.
Category Storage
769