Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software 7.0

771

772

773

774

775

776

777

778

779

780

Recommended

Response Action

Identify and replace the failed components. To identify the failed component, select the

Storage object and click the Health subtab. The controller status displayed on the Health

subtab indicates whether a controller has a failed or degraded component. Click the controller

that displays a Warning or Failed status. This action displays the controller Health subtab

which displays the status of the individual controller components. Continue clicking the

components with a Warning or Failed status until you identify the failed component. See

Storage Health for more information. See the enclosure documentation for information on

replacing enclosure components and for other diagnostic information.

Category Storage

SubCategory STOR = Storage

Severity Severity 2 (Warning)

LCD Message No LCD message display defined.

Initial Default. None

Filter

Visibility

IPMI Alert SNMP

Alert

LC Log LCD Power Off Power

Cycle

Reset

FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE

STOR6

Message CEM Storage Management detected inventory change(s) after host re-boot.

Detailed Description A comparison of storage inventory collected before and after the host re-boot/re-

set. reports differences. There could have been some storage components added or

removed when the host was powered down.

Recommended Response Action No response action is required.