Reference Guide

SUP0116
Message The RAC configuration has initiated restoration to factory defaults. \nPlease wait up
to a minute for this process to complete before accessing \nthe RAC again.
Detailed Description Success message.
Recommended Response Action No response action is required.
Category Updates
SubCategory SUP = FW Update Job
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SUP0117
Message Firmware rollback initiated successfully. \nThe iDRAC will now reset to complete the
firmware rollback operation.
Detailed Description Success message.
Recommended Response Action No response action is required.
Category Updates
SubCategory SUP = FW Update Job
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SUP0118
Message iDRAC reset failed. Please reset the iDRAC manually to complete the firmware
rollback operation.
Detailed Description Success message.
Recommended Response Action Manually reset the iDRAC.
787