Reference Guide

Detailed Description For 11G systems: System Services must be enabled to perform the requested operation.
System Services has been disabled through the iDRAC configuration utility accessed by
pressing CTRL+E on boot up or through a remote operation. For 12G systems: Lifecycle
Controller must be enabled to perform the requested operation. Lifecycle Controller has been
disabled by pressing F2 Setup, selecting iDRAC Configuration, and selecting Lifecycle
Controller Settings on boot up or through a remote operation.
Recommended
Response Action
For 11G systems: Use the iDRAC configuration utility to enable the System Services by
pressing on the CTRL+E option on boot up at the targeted system. For 12G systems: Use F2
Setup, select iDRAC Configuration, and select Lifecycle Controller Settings, to enable the
Lifecycle Controller on boot up of the targeted system.
Category Updates
SubCategory SUP = FW Update Job
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SUP020
Message Specified job deleted.
Detailed Description The specified job was successfully deleted from the job queue.
Recommended Response Action No response action is required.
Category Updates
SubCategory SUP = FW Update Job
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SUP021
Message The specified job cannot be scheduled.
Detailed Description Diagnostics and USC updates are direct updates and cannot be scheduled
Recommended Response Action Do not schedule USC or Diagnostics Jobs.
796