Reference Guide

48
SWC Event Messages
SW0725
Message iDRAC7 communication failure.
Detailed Description iDRAC7 is busy and does not respond to iDRAC7 configurator IPMI requests.
Recommended Response Action Try AC power cycling the server or upgrade the iDRAC firmware.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0001
Message Cannot save the network settings.
Detailed Description Internal error. For more information about the failure, see the Lifecycle Log from
iDRAC.
Recommended Response
Action
Retry the operation. If the problem persists, 1) Turn off the system and disconnect the
power cord. 2) Wait five seconds. 3) Reconnect the power cord and turn on the
system and retry the operation.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
815