Reference Guide

Detailed Description An unrecoverable error occurred in the operation while communicating with iDRAC. An
iDRAC reset or power cycle is recommended. Additional information about the failure
may be available in the Lifecycle Log.
Recommended Response
Action
Retry the operation. If the problem persists 1.) Turn off the system and disconnect the
power cord. 2.) Wait five seconds. 3.) Reconnect the power cord and turn on the
system.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0005
Message Cannot complete the view Current Inventory task.
Detailed Description An unrecoverable error occurred in the operation while communicating with iDRAC. An
iDRAC reset or power cycle is recommended. Additional information about the failure
may be available in the Lifecycle Log.
Recommended Response
Action
Retry the operation. If the problem persists 1.) Turn off the system and disconnect the
power cord. 2.) Wait five seconds. 3.) Reconnect the power cord and turn on the
system.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0006
Message Cannot display the as shipped hardware inventory.
Detailed Description An unrecoverable error occurred in the operation while communicating with iDRAC. An
iDRAC reset or power cycle is recommended. Additional information about the failure
may be available in the Lifecycle Log.
817