Reference Guide

Recommended Response Action Verify the request parameters and retry. Check passphrase for rule validity. NOTE: A
valid passphrase contains 8 to 32 characters. It must include a combination of
uppercase and lowercase letters, numbers, and symbols without spaces.
Category Configuration
SubCategory BAR = Backup/Restore
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
BAR009
Message Valid vFlash media not present.
Detailed Description The vFlash media is not present on the system.
Recommended Response Action Insert the appropriate vFlash media in the designated vFlash portal, enable and
initialize it, and retry.
Category Configuration
SubCategory BAR = Backup/Restore
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
BAR010
Message Unable to create Backup partition on vFlash media.
Detailed Description Backup partition creation has failed.
Recommended Response Action Make sure that the vFlash media is not write-protected. Enable and initialize the
vFlash media, retry backup. If that fails Try new vFlash media or use the Network
Share option(s).
Category Configuration
SubCategory BAR = Backup/Restore
Severity Severity 1 (Critical)
82