Reference Guide

LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0011
Message The LCD Panel Security Settings were modified successfully.
Detailed Description The LCD Panel Security Settings were modified successfully.
Recommended Response Action No response action is required.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0012
Message Cannot load the LCD Panel Security settings.
Detailed Description An unrecoverable error occurred in the operation while communicating with iDRAC. An
iDRAC reset or power cycle is recommended. Additional information about the failure
may be available in the Lifecycle Log.
Recommended Response
Action
Retry the operation. If the problem persists 1) Turn off the system and disconnect the
power cord. 2) Wait five seconds. 3) Reconnect the power cord and turn on the system.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
820