Reference Guide

SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0018
Message Cannot apply the new boot mode settings for BIOS.
Detailed Description As the new options cannot be applied, the current boot settings will be used.
Additional information about the failure may be available in the Lifecycle Log.
Recommended Response Action Exit the wizard and retry. If the problem persists, reboot the system.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0019
Message Test Network Settings failed - Network or memory errors.
Detailed Description Test Network Settings failed. Network or memory errors occurred.
Recommended Response Action Check network settings and ethernet cable connectivity and retry or configure the
network settings and retry. For more information, see Lifecycle Controller
documentation.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
823