Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0020
Message Cannot complete the Key Manager client configuration.
Detailed Description iDRAC cannot set the Key Manager client configuration settings.
Recommended Response Action Retry the operation. If the problem persists, 1) Turn off the system and disconnect
the power cord. 2) Wait five seconds. 3) Reconnect the power cord and turn on the
system.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0021
Message Cannot enable Key Manager mode.
Detailed Description RAID controller cannot enable the Key Manager mode.
Recommended Response Action Exit the wizard and retry, or reboot the system.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0022
Message Cannot switch from Local Key Encryption to Key Manager Encryption because the
provided passphrase is not correct.
824