Reference Guide

Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0132
Message Unable to send test trap. Please make sure that your trap\nhas been configured
correctly and connectivity to \nthe destination endpoint exists.
Detailed Description Either the destination Ip address is not reachable or the required values are not
configured.
Recommended Response Action Check for the connectivity to the configured Ip address.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0133
Message Either connect or disconnect must be specified.
Detailed Description Insufficient information provided.
Recommended Response Action Specify either the connect or the disconnect option with the subcommand.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
842