Reference Guide

Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0241
Message Power Cap Enable not set. Unable to modify this property
Detailed Description To modify this property, set the Power Cap Enable option.
Recommended Response Action Set the Power Cap Enable object and modify the required property.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0242
Message A required license is missing or expired. Obtain an appropriate license and try again, or
contact your service provider for additional details.
Detailed Description The license is missing or expired. This will result in the loss of functionality that is
specific to the features supported by the license.
Recommended Response
Action
Import an appropriate license to iDRAC. If you do not know which license to install,
contact your service provider.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
870