Reference Guide

SWC0245
Message Failed to set object value because local configuration using RACADM is disabled.
Detailed Description Local configuration using RACADM is disabled. This limits local configuration
privileges such as resetting object values.
Recommended Response
Action
Within group cfgRacTuning set the property cfgRacTuneLocalConfigDisable to 0.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0246
Message Value specified is invalid: Valid range is
arg1 .
Arguments
–
arg1 =
index
Detailed Description The specified value is outside of the valid range.
Recommended Response Action Verify that a valid value is specified. See the help text or documentation for valid
values.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0247
Message Invalid subcommand specified.
Detailed Description An invalid subcommand was entered.
872