Reference Guide

SWC0252
Message No options were specified. The subcommand requires options to be used.
Detailed Description Invalid number of arguments were passed to the command.
Recommended Response Action Refer the help text for the command, and enter the required parameters.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0253
Message Unable to allocate memory needed to perform operation.
Detailed Description Unable to allocate memory to perform the operation, see the inserted comment.
Recommended Response Action Power Cycle the system and re-enter the command.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0254
Message Unable to perform requested operation. \nIf the operation attempted was to
configure DRAC, possible reason may be that \nLocal Configuration using RACADM
is disabled.
Detailed Description Local Configuration using RACADM may be disabled.
Recommended Response Action Check if the Local Configuration using RACADM is disabled and enable it through
GUI.
875