Reference Guide

SWC0262
Message Unable to perform operation. Please make sure RAC controller and \nappropriate
IPMI drivers are installed.
Detailed Description The IPMI drivers or the RAC contorller may not be installed.
Recommended Response Action Check if the required modules are installed.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0263
Message Specified path is too long.
Detailed Description The length of path to the firmware image is longer than the specified value.
Recommended Response Action Enter a shorter path to the firmware image file.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0264
Message Resource currently in use by another process. Please retry again later.
Detailed Description The resources required for the execution are in use by another process
Recommended Response Action Wait for the process to release the resources and try again.
Category Configuration
SubCategory SWC = Software Config
879