Reference Guide

SWC0267
Message Unable to perform the requested operation. Make sure a non write protected SD
card is inserted.
Detailed Description Unable to edit the SD card, since it is write protected.
Recommended Response Action Check if the SD card is write protected. If yes, disable the write protection.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0268
Message There is no ASR screen currently available to clear
Detailed Description The ASR screen is already cleared.
Recommended Response Action No response action is required.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0269
Message Unable to clear the RAC log. \nPossible reason may be that Local Configuration
using RACADM is disabled.
Detailed Description Local Configuration using RACADM may be disabled.
Recommended Response Action Check if the Local Configuration using RACADM is disabled and enable it through
GUI.
881