Reference Guide

Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0270
Message Unable to clear the SEL. \nPossible reason may be that Local Configuration using
RACADM is disabled.
Detailed Description Local Configuration using RACADM may be disabled.
Recommended Response Action Check if the Local Configuration using RACADM is disabled and enable it through
GUI.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0271
Message Invalid syntax. The -f option is only valid with -p and -c.
Detailed Description The syntax for the config command is invalid.
Recommended Response Action Refer to the help text for the config subcommand.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
882