Reference Guide

SWC0282
Message The specified object is READ ONLY for this index and cannot be modified.
Detailed Description The value being modified is READ only.
Recommended Response Action No response action is required.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0283
Message The specified object value is not valid.
Detailed Description The value given for the object is not valid.
Recommended Response Action Enter a valid value for the corresponding object.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0284
Message Failed to set the object value. \nPossible reason may be that Local Configuration
using RACADM is disabled.
Detailed Description Local Configuration using RACADM may be disabled.
Recommended Response Action Check if the Local Configuration using RACADM is disabled and enable it through
GUI.
Category Configuration
887