Reference Guide

–
arg2 =
Object Name
–
arg3 =
Value
–
arg4 =
Line No.
Detailed Description The specified objec value is invalid.
Recommended Response Action Configure the specified object and assign a valid value.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0290
Message Failed to configure object. Group:
arg1 , Object : arg2
Arguments
–
arg1 =
Group Name
–
arg2 =
Object Name
Detailed Description Failed to configure the object specified in the error message.
Recommended Response Action No response action is required.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0291
Message Another object exists with the specified value. Duplicate values are\nnot allowed for
the requested object.
Detailed Description Another object of the same value exists. Typically in the case of username.
Recommended Response Action Change the specified value and re-try.
890