Reference Guide

Recommended Response Action Enter the command with the username and password.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0297
Message Unable to remove passwords because file could not be saved.
Detailed Description After the Groups are downloaded to a file, the passwords are to be deleted.
Recommended Response Action No response action is required.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0298
Message The specified object value cannot be configured if local configuration is disabled or smart
card logon is enabled. If smart card logon is enabled, serial, SSH, telnet and IPMIoverLAN
is disabled by force and cannot be enabled.
Detailed Description The specified object value cannot be configured if local configuration is disabled or smart
card logon is enabled. If smart card logon is enabled, serial, SSH, telnet and IPMIoverLAN
is disabled by force and cannot be enabled.
Recommended Response
Action
Enable Local Configuration (through GUI) or Disable Smart Card Logon to change the
value.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
893