Reference Guide

SWC0314
Message Invalid syntax. The -o option requires -g to be specified also.
Detailed Description The syntax of the getconfig command is invalid.
Recommended Response Action Refer the help text for getconfig subcommand.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0315
Message Failed to get object value.
Detailed Description The getconfig subcommand failed to get the object value.
Recommended Response Action No response action is required.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0316
Message The index must be greater than 0.
Detailed Description The value for index must be greater than zero.
Recommended Response Action Enter a positive value for index.
Category Configuration
SubCategory SWC = Software Config
900