Reference Guide

SWC0717
Message iDRAC Local Configuration is disabled. iDRAC Settings are accessed in read-only
mode.
Detailed Description For security reasons, the local configuration is disabled. Enable local configuration
from the iDRAC Web interface
Recommended Response Action Enable iDRAC local configuration from iDRAC Web interface.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0722
Message Error occurred while resetting to defaults. The reset command was not accepted.
Detailed Description iDRAC is processing a previous reset to default command.
Recommended Response Action Retry after a few minutes.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0723
Message Error occurred while Resetting to defaults. The Reset status is not available.
Detailed Description iDRAC is not responding to the current Reset status query.
Recommended Response Action Retry after a few minutes.
Category Configuration
906