Reference Guide

Arguments
–
arg1 =
parameter names
Detailed Description One or more required parameters needed for the operation are missing.
Recommended Response Action Refer to the Lifecycle Controller Remote Services documentation and retry the
operation with the required parameters.
Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS004
Message Invalid parameter value for
arg1 .
Arguments
–
arg1 =
parameter name
Detailed Description The value provided for the specified parameter is invalid.
Recommended Response Action Refer to the Lifecycle Controller Remote Services documentation and retry the
operation with a valid value for the identified parameter.
Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS005
Message AttributeName array and AttributeValue array element count mismatch.
Detailed Description The AttributeName input array and AttributeValue input array do not have the same
number of elements.
Recommended Response Action Verify AttributeName and AttributeValue pairs match and are valid. Refer to the
Lifecycle Controller Remote Services documentation.
916