Reference Guide

Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS006
Message Unable to set read only attribute:
arg1
Arguments
–
arg1 =
attribute name
Detailed Description The attribute being set is currently read-only and cannot be changed.
Recommended Response Action Refer to the Lifecycle Controller Remote Services documentation for the specific
attribute behavior.
Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS007
Message Input out of range for
arg1 .
Arguments
–
arg1 =
attribute name
Detailed Description The input value for the attribute being set is not within the acceptable range for the
attribute.
Recommended Response Action Refer to the Lifecycle Controller-Remote Services documentation for the specific
attribute and retry the operation with valid value within the range of the attribute.
Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
917