Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS010
Message Invalid character in value for attribute:
arg1
Arguments
–
arg1 =
attribute name
Detailed Description The input value for the specified attribute is not valid.
Recommended Response Action Refer to Lifecycle Controller-Remote Services docuementation and provide valid
attribute value for the specified attribute.
Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS011
Message Pending configuration values already committed, unable to perform another set
operation.
Detailed Description A configuration job is scheduled to apply pending set attribute operations. Set
operations are not allowed if there is an existing configuration job for a component.
Recommended Response
Action
Wait for the scheduled job to complete or delete the configuration jobs before
attempting more set attribute operations.
Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
919