Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
TMP2
Message
arg1 has crossed the minimum warning threshold.
Arguments
–
arg1 =
tempsensor name
Detailed Description The enclosure is too cold.
Recommended Response Action Check whether the thermostat setting is too low and whether the room temperature
is too cool.
Category Storage
SubCategory TMP = Temperature
Severity Severity 2 (Warning)
Trap/EventID 4210
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
TMP3
Message
arg1 has exceeded the maximum failure threshold.
Arguments
–
arg1 =
tempsensor name
Detailed Description The enclosure is too hot. A variety of factors can cause the excessive temperature. For
example, a fan may have failed, the thermostat may be set too high, or the room
temperature may be too hot.
Recommended Response
Action
Check for factors that may cause overheating. For example, verify that the enclosure fan is
working. You should also check the thermostat settings and examine whether the
enclosure is located near a heat source. Make sure the enclosure has enough ventilation
and that the room temperature is not too hot. Refer to the enclosure documentation for
more diagnostic information.
Category Storage
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID 4209
949