Reference Guide

LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
TMP4
Message
arg1 has crossed the minimum failure threshold.
Arguments
–
arg1 =
tempsensor name
Detailed Description The enclosure is too cold.
Recommended Response Action Check whether the thermostat setting is too low and whether the room temperature
is too cool.
Category Storage
SubCategory TMP = Temperature
Severity Severity 1 (Critical)
Trap/EventID 4209
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
TMP5
Message The temperature probe maximum warning value was changed on
arg1 .
Arguments
–
arg1 =
Enclosure name
Detailed Description You have changed the value for the maximum temperature probe warning threshold.
This alert is provided for informational purposes.
Recommended Response Action No response action is required.
Category Storage
SubCategory TMP = Temperature
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
950