Reference Guide

LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
TST105
Message Invalid parameter value for
arg1 .
Arguments
–
arg1 =
parameter name
Detailed Description The value provided for the specified parameter is invalid.
Recommended Response Action To provide the correct value for the specified parameter, see Lifecycle Controller-
Remote Services documentation.
Category Configuration
SubCategory TST = Test Alert
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
TST106
Message Email alert destination address not configured.
Detailed Description The email alert being tested is not properly configured.
Recommended Response Action Configure the email alert and retry the operation. If the failure persists, reset iDRAC.
Category Configuration
SubCategory TST = Test Alert
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
955