Reference Guide

54
VDR Event Messages
VDR1
Message
arg1 failed.
Arguments
–
arg1 =
VD Name
Detailed Description A storage component such as a physical disk or an enclosure has failed. The failed
component may have been identified by the controller while performing a task such as
a rescan or a check consistency.
Recommended Response
Action
Replace the failed component. You can identify which component has failed by
locating the component that has a red "X" for its status. Perform a rescan after
replacing the failed component.
Category Storage
SubCategory VDR = Virtual Disk
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
VDR10
Message Formatting the
arg1 has started.
Arguments
–
arg1 =
VD Name
Detailed Description This alert is provided for informational purposes.
Recommended Response Action No response action is required.
Category Storage
SubCategory VDR = Virtual Disk
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
975