Reference Guide

Arguments
–
arg1 =
virtual disk
Detailed Description The initialization operation could not be completed. This may be due to a user action
or a physical disk failure.
Recommended Response Action If a physical disk failed, then replace the physical disk. Restart the virtual disk
initialization.
Category Storage
SubCategory VDR = Virtual Disk
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
VDR16
Message Consistency check of
arg1 failed.
Arguments
–
arg1 =
virtual disk
Detailed Description A physical disk included in the virtual disk failed or there is an error in the parity
information. A failed physical disk causes errors in parity information.
Recommended Response
Action
Check that all the physical disks of the virtual disk are in a healthy condition. Replace
any disks that are not healthy and restart the operation. If this is not the problem, delete
the virtual disk and restore the data to the disk from a backup copy.
Category Storage
SubCategory VDR = Virtual Disk
Severity Severity 1 (Critical)
Trap/EventID 4353
LCD Message No LCD message display defined.
Initial Default. SNMP Alert
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
VDR17
Message
arg1 format failed.
978