Reference Guide

Recommended Response
Action
As indicated by the job status, wait for restore to complete. After the status displays
Complete or Failed, wait for a few minutes for the Integrated Remote Access Controller
(iDRAC) to restart. After restart, power on the Host System using iDRAC.
Category Configuration
SubCategory BAR = Backup/Restore
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
BAR050
Message Performing Firmware Restore for Device :
arg1
Arguments
–
arg1 =
device name
Detailed Description The firmware update for the specified device in progress.
Recommended Response Action No response action is required.
Category Configuration
SubCategory BAR = Backup/Restore
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
BAR051
Message Performing Component Configuration Restore for Device :
arg1
Arguments
–
arg1 =
device name
Detailed Description The configuration import for the specified device in progress.
Recommended Response Action No response action is required.
Category Configuration
SubCategory BAR = Backup/Restore
99