Manualshelf

Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software Version 9.0.1
41424344454647484950
Cause
Remove and reinstall the Non-Volatile Dual In-line Memory Module (NVDIMM) device. If the issue persists,
contact your service provider. For information about removing and reinstalling the NVDIMM, see the system
Owner's Manual on the support site.
Event ID — 1432
Description
The Non-Volatile Dual In-line Memory Module (NVDIMM) device in the slot mentioned in log, cannot be
congured to save data during a power loss because of an issue in the NVDIMM.
Severity Critical
Cause
Remove and reinstall the Non-Volatile Dual In-line Memory Module (NVDIMM) device. If the issue persists,
contact your service provider. For information about removing and reinstalling the NVDIMM, see the system
Owner's Manual on the support site.
Event ID — 1433
Description
The Non-Volatile Dual In-line Memory Module (NVDIMM) devices are placed in write-protect mode because
the system may not provide sucient power to save data in case of power loss.
Severity Critical
Cause
TBD
Event ID — 1434
Description
The Non-Volatile Dual In-line Memory Module (NVDIMM) device in the slot mentioned in log, has reached
the end of supported life duration and is placed in write-protect mode.
Severity Critical
Cause
Replace the Non-Volatile Dual In-line Memory Module (NVDIMM) device. For information about removing
and reinstalling the NVDIMM, see the system Owner's Manual on the support site.
Event ID — 1435
Description
The Non-Volatile Dual In-line Memory Module (NVDIMM) device in the slot mentioned in log, has lost
persistency and is placed in write-protect mode.
Severity Critical
Cause
Remove and reinstallthe Non-Volatile Dual In-line Memory Module (NVDIMM) device. If the issue persists,
contact the service provider. For information about removing and reinstalling the NVDIMM, see the system
Owner's Manual on the support site.
Hardware Log Sensor Messages
The hardware logs provide hardware status messages to systems management software. On certain systems, the hardware log is
implemented as a circular queue. When the log becomes full, the oldest status messages are overwritten when new status messages
43