Reference Guide
Understanding the Event Description
Table below lists in alphabetical order each line item that may appear in the event description.
Description Line
Item
Action performed was: <Action>
Explanation Species the action that was performed, for example: Action performed was: Power cycle
Description Line
Item
Action requested was: <Action>
Explanation Species the action that was requested, for example: Action requested was: Reboot, shutdown OS
first
Description Line
Item
Additional Details: <Additional details for the event>
Explanation Species additional details available for the hot plug event, for example: Memory device: DIMM1_A Serial
number: FFFF30B1
Description Line
Item
<Additional power supply status information>
Explanation Species information pertaining to the event, for example: Power supply input AC is off, Power
supply POK (power OK) signal is not normal, Power supply is turned off
Description Line
Item
Chassis intrusion state: <Intrusion state>
Explanation Species whether the chassis intrusion state is Open or Closed. For example: Chassis intrusion state:
Open
Description Line
Item
Chassis location: <Name of chassis>
Explanation Species name of the chassis that generated the message, for example: Chassis location: Main System
Chassis
Description Line
Item
Configuration error type: <type of configuration error>
Explanation Species the type of conguration error that occurred, for example: Configuration error type:
Revision mismatch
Description Line
Item
Current sensor value (in Amps): <Reading>
Explanation Species the current sensor value in amps, for example: Current sensor value (in Amps): 7.853
Description Line
Item
Date and time of action: <Date and time>
Explanation Species the date and time the action was performed, for example: Date and time of action: Sat Jun
12 16:20:33 2004
22 Introduction