Reference Guide

Event Message Severity Cause
Memory is not redundant.
Information This event is generated when the memory
redundancy mode has change to
nonredundant.
Memory mirror is redundant.
Information This event is generated when the memory
redundancy mode has change to mirror
redundant.
Memory mirror redundancy is
lost. Check memory device at
location(s) <DIMM number>.
Critical This event is generated when redundancy is
lost in a mirror-congured memory
conguration.
Memory mirror redundancy is
degraded. Check memory device
at location <DIMM number >.
Warning This event is generated when there is a
memory failure in a mirror-congured
memory conguration.
Memory spare is redundant.
Information This event is generated when the memory
redundancy mode has change to spare
redundant.
Memory spare redundancy is
lost. Check memory device at
location <DIMM number>.
Critical This event is generated when redundancy is
lost in a sparer-congured memory
conguration.
Memory spare redundancy is
degraded. Check memory device
at location <DIMM number>.
Warning This event is generated when there is a
memory failure in a spare-congured
memory conguration.
Hardware Log Sensor Events
The hardware logs provide hardware status messages to the system management software. On particular systems, the subsequent
hardware messages are not displayed when the log is full. These messages provide status and warning messages when the logs are full.
Table 13. Hardware Log Sensor Events
Event Message Severity Cause
Log full detected.
Critical This event is generated when the SEL
device detects that only one entry can be
added to the SEL before it is full.
Log cleared.
Information This event is generated when the SEL is
cleared.
System Event Log Messages for IPMI Systems 225